Author: Methena ／ Release Time: 2025-06-19 ／ Pageviews:
If you want to ensure the long service life of METHENA’s Planetary Mixer machine, daily maintenance is important. Planetary Mixer machine is widely used in the baking industry and daily pastry. Its main function is to save manpower and work continuously, and it needs to withstand high-intensity use. However, if you do not pay attention to maintenance, the most fatal situation will occur for the spiral mixer. The finished dough will not be mixed evenly, resulting in the quality of the final product becoming defective and affecting sales. If the motor is not checked for a long time, it is easy to cause the motor to overheat and parts to wear. These improper handling will directly affect the quality and production of the product.
1.Extend the service life of the equipment: Timely inspection and cleaning can avoid excessive wear and tear of easily worn parts.
2.Even mixing: Especially for the mixing parts in the industrial dough mixer machine, the purpose of regular inspection is to check whether there is any accumulation of foreign matter in the pot during operation, which can ensure the full fusion of flour and water.
3.Hygiene and safety are guaranteed: Regular cleaning can effectively prevent bacterial growth and provide hygiene and safety for consumers.
4.Ensure the continuity of the spiral mixer: Regular inspection can ensure that the equipment cannot be used due to emergencies during the work process, and prevent problems in advance.
5.Save money for you: If the daily small maintenance is not done well, there will definitely be a big maintenance later. Doing a good job of small maintenance is actually to save you money.
First, check whether there is any dough residue on the mixing rod and accessories to avoid mixing them together the next time you use them. This is unhygienic and unsafe.
After using the equipment, you need to carefully clean the head of the internal mixer, mainly to prevent the moving part of the mixer from being accumulated by dough
Check the motor and transmission system to ensure that no dough or other grease enters the motor.
The regular maintenance part mainly accounts for three parts: (parts, electrical, equipment reinforcement)
1: Check the lubrication of the transmission bearing and gear parts of the industrial dough mixer machine regularly every month, quarter or even year. It is very critical and directly affects whether your output can be increased and whether the dough is mixed evenly.
2: If the chain and belt parts are obviously worn, please replace them immediately.
3: Motor testing. Overheating of the motor directly causes problems with the line and the machine is paralyzed and cannot be used.
The screw reinforcement of the equipment needs to be checked regularly to avoid loose parts during use. In particular, the base bolts should be tightened.
4: The scope of comprehensive maintenance design is mainly the replacement of gearboxes and seals. Check whether the running speed is up to standard, and pay special attention to abnormal noise
First of all, when METHNEA sells horizontal dough mixers, we will give away the easily worn parts of the equipment. The later parts can save your costs. Moreover, our equipment is constantly upgraded, and the stability and wear resistance are much higher than other dough mixers. However, it also needs daily maintenance.
● It cannot exceed 80% of the container capacity. The dough needs to be appropriate and cannot be 100% equal to the capacity.
● The equipment should not be stored in a humid environment, which is easy to breed bacteria and may rust.
● Daily cleaning must be done, which is good for the machine and responsible for the safety of consumers
● Daily damaged parts must be prepared, especially vulnerable belts, seals and fuses.
● Daily lubrication and tightening of equipment parts need to be implemented in place.
Conclusion：
Even if it is a particularly good planetary mixer, daily maintenance is necessary. Your daily maintenance is regarded as a combination of money and time to save you money. Would you not do it? I don't believe it. I hope this article can help you extend the life of your equipment.
